Which pixel pitch should I choose for a storefront LED film?

Match pitch to viewing distance: P2–P2.6 for close viewing within 3 meters (in-mall shopfronts), P3.9–P7.8 for street-facing windows viewed from 5–20 meters. Larger atrium and facade glass uses P7.8–P15 where viewers are far away and cost per square meter matters.

Does LED film block daylight in the store?

No — the film is 60–90% transparent depending on model, so daylight continues to enter. The strips of LEDs are only visible when the content is playing; from inside, most shoppers notice nothing on the glass.

How is transparent LED film installed and powered?

The film ships cut to your glass dimensions with a self-adhesive backing; installers apply it to the clean glass surface like a large sticker (typically hours per storefront), run a slim cable to a control box and power, and mount a small receiving-card unit at the frame. Content plays from a media player or is managed remotely over WiFi/4G.

Transparent LED Film: Turn Storefront Glass Into an Advertising Asset

Q: What is transparent LED film?

Transparent LED film (also called LED glass film or adhesive LED screen) is an ultra-thin self-adhesive LED display that mounts directly onto glass. It is 60–90% transparent, 2–5 mm thick, and plays full-color video while daylight keeps passing through. It is cut to the exact dimensions of each glass panel.

Short answer: transparent LED film is a self-adhesive, 2–5 mm-thin LED display that sticks directly onto glass, stays 60–90% transparent, and plays full-color video to everyone walking past — while daylight keeps coming in. It's the only screen that turns the glass you already own (shop windows, mall atriums, glass facades) into media without construction.

KEY TAKEAWAYS

No construction: self-adhesive film cut to your exact glass size; installs in hours, not days.
60–90% transparent: daylight in, media out — from inside, shoppers barely notice it.
Pitch by distance: P2–P2.6 in-mall close viewing; P3.9–P7.8 street windows; P7.8–P15 huge atrium/facade glass.
Perfect for: retail windows, mall atrium railings and roofs, car showrooms, airport and bank glass walls.

How transparent LED film actually works

Instead of a solid panel of LEDs, the film places LED lamp beads on ultra-thin transparent PCB strips with wide gaps between the strips. Your eye fills in the gaps — so when content plays, you see a vivid image floating on the glass; when it's off, the glass looks nearly untouched. The film carries a self-adhesive backing and ships cut to each panel's exact dimensions, including shaped and curved glass on curved-surface projects.

→ See our transparent & film LED displays — P1.9–P20, indoor and outdoor-rated options.

Choosing the right pitch for your glass

Scenario	Viewing distance	Recommended pitch
In-mall shopfront, interior glass wall	1–5 m	P2–P2.6
Street-facing shop window	5–20 m	P3.9–P7.8
Mall atrium railing / roof glass	10–40 m	P7.8–P15
Building facade glass curtain wall	30 m+	P10–P20

Rule of thumb stays the same as every LED decision: minimum comfortable viewing distance in meters ≈ pixel pitch in mm. Finer pitch costs more per square meter — don't pay for pixels nobody stands close enough to see.

Where it's being used right now

Retail windows: product films and promotions playing on glass that used to hold a static vinyl — updated remotely, changed weekly.
Mall atriums: glass railings and roofs become seasonal campaign canvases; the mall sells the space to brands exactly like a facade wall.
Car showrooms: glass showrooms play launch films while the cars stay fully visible.
Banks, airports, corporate lobbies: welcome content and information on entrance glass without losing openness.

Installation: faster than any other screen

Measure the glass — we cut the film to exact panel dimensions (including shapes).
Clean and apply — installers apply the self-adhesive film like a large decal; a storefront typically takes hours.
Connect control + power — a slim cable runs to a control box; receiving card mounts at the frame.
Play content — media player on site, or remote management over WiFi/4G from one dashboard.

No steel structure. No framing. No landlord battles over the facade — it's your own glass.

Outdoor glass? Check the rating

Interior glass (malls, showrooms) uses standard film. Street-facing and exterior glass needs an outdoor-rated film with weatherproofing and higher brightness (4,000–5,500 nits) to beat sunlight. Tell us the orientation and city climate and we'll spec the right model — brightness that's insufficient for a sun-facing window is the most common first-time-buyer mistake.

Have glass that should be selling for you?

Send a photo and the glass dimensions — we'll reply within 24 hours with the right film pitch, a layout mockup and a factory quote. Cut-to-size included.

Get a Film Quote

FAQ

What is transparent LED film?

An ultra-thin self-adhesive LED display (2–5 mm) that mounts directly on glass, 60–90% transparent, playing full-color video while daylight passes through. Cut to the exact dimensions of each glass panel.

Which pitch for a storefront?

P2–P2.6 for close in-mall viewing (1–5 m); P3.9–P7.8 for street-facing windows (5–20 m); P7.8–P15+ for large atrium and facade glass.

Does it block daylight?

No — 60–90% transparency keeps the store bright. LED strips are only noticeable when content plays.

How is it installed and powered?

Applied to clean glass like a large decal (hours per storefront), a slim cable to a control box, receiving card at the frame; content from a media player or remote dashboard over WiFi/4G.